Silverline 633567 Torque Wrench 28 - 210Nm 1/2" Drive

Product Information

Tip: Always reset your torque wrench to its lowest value after use. This helps it to stay correctly calibrated for longer

Silverline 633567 Torque Wrench 1/2 inch Drive 28-210 Nm Silverline 633567 Torque Wrench 1/2 inch Drive 28-210 Nm

For cylinder head bolts, triple clamp bolts, and cylinder heads, a ⅜ inch wrench is required. For minor stuff like oil-filter cover bolts and engine case bolts, you need a 6mm wrench. Over-tightening your axle nuts can impede movement. Loose axle nuts can result in unintentional wheelies and horrible accidents. Incorrect force on your engine casings can result in an improper seal if too loose and damage the casings and gaskets if too tight. For the flywheel, primary drive, and axle nuts of your bike, a ½ inch wrench is the correct tool for the job.Digital torque wrenches have a digital display that gives users an even more accurate reading. For most people, this is overkill. But if you have other hobbies that require the tools, you own a highly-tuned superbike, or you like precision – a digital torque wrench won’t break the bank.

torque wrench for your car - Parkers best torque wrench for your car - Parkers

If you intend to do even basic maintenance on your motorcycle, don’t try it without a cheap torque wrench. You must know how much force you’re applying when tightening things on a motorcycle. What Sizes and Values?Bolts on a motorcycle require a force of between 3 – 200 Nm. A single torque wrench can’t effectively cover all of that. To safely adjust all of the bolts on your bike, several wrenches are required. Your motorcycle owner’s manual will have a record of the torque values for every fitting on your model. Analogue or Digital?